Large Atmospheric Thruster
Thruster block information is listed in the table down below.
 Thruster Block |
|
| Components | Required |
| Steel Plate | 130 |
| Construction Component | 20 |
| Functional | |
| Motor | 1,100 |
| Metal Grid | 40 |
| Large Steel Tube | 50 |
| Construction Component | 40 |
| Steel Plate | 100 |
| Info | |
| Dimensions (W,H,L) | 3,3,5 |
| Mass | 32,970 kg |
| Integrity | 73,000 |
| Build Time | 90 s |
| Max Power Consumption | 16.8 MW |
| Min Power Consumption | 2 W |
| Force | 6,480 kN |
| Effectiveness at max influence | 100 % |
| Effectiveness at min influence | 0 % |
| Max planetary influence | 100 % |
| Min planetary influence | 30 % |
| Max Flame Length | 11.233 m |
| Power Consumer Group | Thrust |
| Is Airtight | Partially |
| PCU Cost | 15 |
 Thruster Block |
|
| Components | Required |
| Steel Plate | 10 |
| Construction Component | 10 |
| Functional | |
| Motor | 90 |
| Metal Grid | 8 |
| Large Steel Tube | 4 |
| Construction Component | 20 |
| Steel Plate | 10 |
| Info | |
| Dimensions (W,H,L) | 3,3,5 |
| Mass | 2,948 kg |
| Integrity | 6,980 |
| Build Time | 20 s |
| Max Power Consumption | 2.4 MW |
| Min Power Consumption | 2 W |
| Force | 576 kN |
| Effectiveness at max influence | 100 % |
| Effectiveness at min influence | 0 % |
| Max planetary influence | 100 % |
| Min planetary influence | 30 % |
| Max Flame Length | 2.21 m |
| Power Consumer Group | Thrust |
| Is Airtight | Partially |
| PCU Cost | 15 |
Overview
Large Atmospheric Thrusters are powered “Thrust“`blocks that only work while they’re in an atmosphere of a planet (not any atmosphere in general such as a pressurized room outside a planetary influence). Their effectiveness is proportional to the “thickness” of the atmosphere they’re operating in, being completely ineffective in Space. It moves a ship (grid) in the opposite direction of the exhaust point. The Large Atmospheric Thrusters are more efficient than Small Atmospheric Thrusters, but they’re costly up front, and heavier.
- For more information on all thrusters and their mechanics, see Thruster.
Usage
Thrusters are used to move a ship (grid) in a specific direction, and also used to stabilize it’s position with Inertial dampeners. In order for a grid to be entirely stable, thrusters must be pointed towards the front, back, left, right, top, and bottom of the grid.
Large Atmospheric Thrusters don’t require any type of fuel other than energy sources such as a Large Reactor in order to function. They can run on any amount of power, however their full potential can only be used with larger amounts of power.
Tips
Full build cost for a Large Atmospheric Thruster is : 5 496 iron ingots, 24 cobalt ingots, 780 nickel ingots.
Programming
Thruster (Ion, Hydrogen, Atmospheric)
Interface name: IMyThrust
Parent: IMyFunctionalBlock
Fields:
float Override
Actions:
OnOff -> Toggle block On/Off
OnOff_On -> Toggle block On
OnOff_Off -> Toggle block Off
IncreaseOverride -> Increase thrust override
DecreaseOverride -> Decrease thrust override
An outstanding share! I've just forwarded this onto a coworker who had been conducting a little research on this. And…